Table of Contents
Advertisement
OC3port Plus
Users Manual
Manually Storing Test Results
To store test results, press the
After you press the
message indicates that the result you are viewing has been stored in the tester's
memory. Any results you store are retained even after you turn off the OC3port
Plus.
You can store LED status records and results from any of the following tests:
•
&)68
•
%81 'IPP PSWW
•
732)8
•
Automatic tests.
Depending on the type of test record, the OC3port Plus has a limitation on the
number of records that it can store in memory. In addition, the tester's storage is
circular so that when the limitation for a particular test is reached, the record at the
bottom of the stack is deleted as a new record is added to the top.
Table 3-1 provides a list of storage limitations for each group of test records that
you can store:
Test Records
BERT
LED Status
ATM cell loss
Alarm
Counters
Automatic diagnostic tests
3-18
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key while viewing the results on the LCD.
MEMORY
key, you see this message: RECORD SAVED. This
MEMORY
Table 3-1. Storage Limits for Test Records
Storage Limit
100
100
128
128
32
10
Advertisement
Table of Contents
