Table of Contents
Advertisement
2. Press the
or
Left
The setting you selected is now the current value for the
parameter.
3. Press the
Down Arrow
selection line:
TRANSMIT STREAM:
TIME STAMP OFF
FIXED PAYLOAD:6A
PAYLOAD FIXED
This hexadecimal value is used to fill the payloads of all cells in a transmission
stream when the
can be set from 00 to FF.
If you want to change this parameter, press the
Then, press the arrow keys to supply the desired value. Make sure that you
press
to save the change.
ENTER
The value you specified is now the current value of the
parameter.
4. Press the
Down Arrow
line:
TRANSMIT STREAM:
FIXED PAYLOAD:6A
PAYLOAD FIXED
CHECK SUM ON/OK
The
PAYLOAD
transmission stream. This parameter has three settings:
•
*-<)(
•
3%1
•
BERT
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Configuring for ATM Network Testing
Configuring an ATM Cell Transmission Stream
key to select the desired setting.
Right Arrow
key to move the
FIXED PAYLOAD
parameter is set to FIXED. The hexadecimal value
PAYLOAD
key to move the
PAYLOAD
parameter selects the type of payload used by every cell in the
TIME STAMP
parameter to the
1
key to enter Edit mode.
EDIT
FIXED PAYLOAD
parameter to the selection
1
5
za066f.eps
za067f.eps
5-11
Advertisement
Table of Contents
