Show Test Results - Fluke ESA615 User Manual

ESA615
Users Manual
When the test sequence step is a visual inspection, you
must push the Pass, Fail, or N/A softkey to move on to
the subsequent test step.
When the Product measures a value(s) for a test, Testing
shows in the display. When the test step is done, the
results are shown with PASS or FAIL in the display.
When a test step ends, you can add comments to supply
more information about the test step.
When the test sequence is done, a name is made from the
equipment number, the date, and the time. To change the
name, push e or the Edit softkey. To put the test
sequence on the memory card, push the Save softkey.

Show Test Results

To show test results in the display:
1. Push t.
2. Push H or G to highlight a test results name.
Push softkey F1 to toggle between sort results by
date or sort A-Z.
3. Push e to show the test and its results in the
display.
4. Push G or H to highlight a test result.
5. Push e to show the test results in the display.
70
Note
6. Push the Back softkey to go back to the test results
list.
When you push the Start Test Sequence softkey, the
complete test sequence starts.
Delete a Set of Test Results
To delete a test result:
1. Push t.
2. Push H or G to highlight a test result name.
Push softkey F1 to toggle between sort results by
date or sort A-Z.
3. Push the Delete softkey.
A delete confirmation screen will show in the display.
4. Push the Delete softkey.
Note