Table of Contents
Advertisement
Returning to the Introductory Display
Whenever you are finished with a particular function (for example, monitoring test
results or performing setups), you can return to the introductory display from any
menu or submenu by pressing the
introductory display:
OC3port+
03-14-99
Resetting the OC3port Plus
You reset the OC3port Plus by pressing the
When you reset the tester, it performs a self-test and leaves you at the introductory
display. This function is useful when you want to put the OC3port Plus in a known
state.
When you reset the OC3port Plus, it does not restore the default settings. For
information on restoring these settings, see "Restoring Factory Default Settings" in
this chapter.
Restoring Factory Default Settings
You can reset the OC3port Plus so that the settings for menu options are the same
as they were when the unit was shipped from the factory. To restore the factory
default settings, follow these steps:
Be careful when you restore the factory defaults because
any settings and configurations you previously stored in
Parameter Sets 1 through 4 are replaced by the factory
default values.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting Up and Operating the OC3port Plus
key. The unit returns you to this
ESC
FLUKE CORPORATION
SELECT MENU FUNCTION
ESC
Caution
Performing Basic Operations
3.3
7:22:10 PM
key twice within one second.
3
za023f.eps
3-15
Advertisement
Table of Contents
