Table of Contents
Advertisement
Step 3: Identify the address of the cell transmission.
1. Scroll to the top of the menu.
2. Press the
Left Arrow
3. Press the
Down Arrow
4.
Press the
Left
TRANSMIT STREAM:
NAME:XMITHDR_1
SOURCE CBR
VPI:0000
5. Press
Down Arrow
6. Press the
EDIT
7. Press
to save the change.
ENTER
Continue in this manner until the entire header (
options) is set up, making sure that you press
for each parameter.
You have completed setting up the address information for the cell
transmission to the master unit.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key to display the setup menu for
key to move the
SOURCE
or
key to set its value to
Right Arrow
key to move the
option to the selection line.
VPI
key to enter Edit mode and supply a value for this option.
Testing ATM Networks
Quality of Service Tests
TRANSMIT STREAM 1.
option to the selection line.
, as in the following:
CBR
1
, and
VPI, VCI, PT, CLP
GFC
after you specify a value
ENTER
6
za068f.eps
6-61
Advertisement
Table of Contents
