Table of Contents
Advertisement
OC3port Plus
Users Manual
Editing the Setting for an Option
Some settings for an option require you to supply a value rather than select an item
from a menu. You do this by editing the current value of the setting. This example
shows you how to edit a setting.
1. Press the
2. Press the
line, as in:
3. Press
ENTER
4. Press the
indicated by the blue directional arrows located on each side of the LCD).
Then, press the
The first character of the VCI field is flashing. This flashing character
indicates that you are now in Edit mode.
2-16
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key. The
ATM
ATM SELECTIONS
ATM
SELECTIONS:
- - - - - - - - - - - - - - - - - - - - - - -
Monitor ATM
Setup RX Filters
key until the
Down Arrow
Setup RX Filtrs
ATM
SELECTIONS:
Monitor ATM
Setup RX Filtrs
Setup XMIT Streams
. You see the
RECEIVE FILTER 1
RECEIVE FILTER:
or
for Change
NAME:FILTER_1_
LOAD TX HDR TX1
key until the VCI setting is on the selection line (as
Down Arrow
key.
EDIT
menu is displayed:
option is on the selection
submenu:
1
za010f.eps
za011f.eps
za012f.eps
Advertisement
Table of Contents
