Table of Contents
Advertisement
OC3port Plus
Users Manual
5. Press the
The
MBS (Maximum Burst Size)
of cells that can be transmitted consecutively at the rate defined by
Press the
when you finish to save the change.
ENTER
6. Press the
The OC3port Plus provides optimum spacing and positioning between cells in
a transmission stream. The
(in units of ATM cells) that the tester can vary from this optimum placement.
To change the value of the
mode. Then, press the arrow keys and supply the desired value. Make sure that
you press
7. Press the
This parameter has two settings:
specify for the
8. Press the
parameter.
The OC3port Plus is now configured with your transmission source, traffic
rate, and traffic shape selections.
5-14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key to move the
Down Arrow
traffic parameter defines the maximum number
key to enter Edit mode and supply a value for
EDIT
key to move the
Down Arrow
TRANSMIT STREAM:
MBS:0010 Cells
CDV LIM: 020.00 Cls
SHAPER ON
CDV LIM
CDV LIM
when you are done to save the change.
ENTER
key to move the
Down Arrow
TRANSMIT STREAM:
CDV LIM: 020.00 Cls
SHAPER ON
TIME STAMP ON
ON
, and
MBS, PCR
SCR
or
key to select the desired value for the
Left
Right Arrow
parameter to the selection line.
MBS
MBS
to the selection line: parameter
CDV LIM
1
parameter lets you set the maximum limit
parameter, press the
EDIT
parameter to the selection line:
SHAPER
1
and
. When set to
OFF
ON
traffic parameters are enforced.
.
PCR
. Press
za070f.eps
key to enter Edit
za071f.eps
, the values you
SHAPER
Advertisement
Table of Contents
