Table of Contents
Advertisement
OC3port Plus
User Manual
Displaying the Results of the Previous Cell Capture
The OC3port Plus stores the results of the last cell capture you conducted since
you turned on the tester. To display the results of the last cell capture you
conducted, do the following:
1. Press the
2. Press the
Then, press
3. Press the
selection line, as in the following:
4. Press
ENTER
displayed. (See "Looking at the Captured Cells" for information that the
OC3port Plus provides on the cells stored in the buffer.)
If no cells are stored in the buffer, you see this message:NO CELLS
CAPTURED.
Capturing ILMI Cells
A number of ATM standards bodies have provided for the transportation of
Interim Local Management Interface (
(VCI 16) in any virtual path.
This section shows you how to set up the OC3port Plus to capture ILMI cells and
how to look at the captured cells, which are stored in the tester's buffer. Capturing
ILMI cells provides you with a good deal of information about the operation of an
OC3-ATM link.
6-22
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key. The
ATM
ATM SELECTIONS
key to move the
Down Arrow
. The
ENTER
CELL CAPTURE
key to move the
Down Arrow
CELL CAPTURE
Start Cell Capture
Review Cell Capture
Set A to Filter
. The results of the previously conducted cell capture are
Note
ILMI
menu is displayed.
option to the selection line.
Cell Capture
submenu is displayed.
option to the
Review Cell Capture
1
) traffic on a dedicated virtual circuit
za103f.eps
Advertisement
Table of Contents
