Table of Contents
Advertisement
OC3port Plus
Users Manual
Getting Acquainted with the OC3port Plus Menus
The OC3port Plus is a menu driven system. Each time you power on the unit, a
series of self-tests and automatic ATM and SONET diagnostic tests is performed.
The single-mode version of the OC3port Plus contains a laser
transmitting device. As a safety precaution, this transmitter is off
when the unit is powered on. You must turn the laser on each time
you turn on the unit. It remains on until you shut off the unit.
See "Turning on the Laser Transmitter" in this chapter for
instructions on how to turn on the laser transmitter. Note that the
laser comes on automatically if the OC3port Plus detects an input
signal while you are running the automatic diagnostic tests.
While the automatic tests are running, you see displays similar to this:
When the tests are completed, you hear a "beep" and see the
display, which looks like this:
From this display, you can access any of the OC3port Plus menus. See "Accessing
a Menu", which follows in this chapter.
2-12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Note
******************************
ANALYZING
SIGNAL
******************************
AUTOTEST
SUMMARY
- - - - - - - - - - - - - - - - - - - - - - - - -
ATM Detected:
Background:
14
AUTOTEST SUMMARY
OK
UNAS
za006f.eps
za007f.eps
Advertisement
Table of Contents
