Table of Contents
Advertisement
This option has these four settings:
•
Performs a fast scan (maximum of one second per address bit) of
FST
the ATM signal.
•
Performs a medium scan (maximum of two seconds per address
MED
bit) of the ATM signal.
•
Performs a slow scan (maximum of five seconds per address bit)
SLW
of the ATM signal.
•
!USR Performs a scan of the ATM signal using a user-defined value for
the scan duration. This value can range from .01 to 10.00
seconds.
4. Do one of the following:
•
If you want to use the pre-defined scan rates (FST
the
or
Left
Right Arrow
The change takes effect immediately. The setting you selected is now the
rate the OC3port Plus uses to scan received signals.
•
If you want to set your own scan rate, press the
select the !USR setting. Then, press
AUTO - SCAN DURATION
SCAN TIME: 10.00 SEC
You are in Edit mode as indicated by the flashing
the
SCAN T!ME
range is from .01 to 10.00 seconds.
When you finish, press
OC3port Plus uses to scan received signals.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Scanning Circuits for ATM Activity
key to display the desired setting.
OR
ENTER
field. Press the arrow keys to select a value. The valid
. The value you entered is now the rate the
ENTER
Testing ATM Networks
MED, or SLW), press
,
or
key to
Left
Right Arrow
. You see this display:
in the first position of
1
6
za118f.eps
6-37
Advertisement
Table of Contents
