Table of Contents
Advertisement
OC3port Plus
User Manual
3. Make sure that the
. You see the result display for the receive filter. For example:
ENTER
If you press the
counters are set to zero.
This display contains the following information:
• Line 1
• Line 2
• Line 3
• Line 4
4. Press the
receive filter:
6-10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
option is on the selection line. Then, press
Monitor ATM
Note
key while viewing a result display, all
CLEAR
R1: CIRCUIT A
125 0016 PT0 CP1 G0
1.76E+09 C
146.76MBPS
Identifies the receive filter (R1) by name (in this case, "Circuit
A").
Provides the header information (values of the VPI, VCI, PT,
CLP, and GFC settings).
Provides both the total count of ATM cells received that match
the receive filter and a count of matching cells received during
the previous second.
Indicates the cell reception rate in megabits per second and the
percent bandwidth.
key. You see additional information on Line 4 for the
Right Arrow
R1: CIRCUIT A
125 0016 PT0 CP1 G0
1.76E+09 C
AVER CPS
353207CPS
100.00%BW
353207CPS
353166.70
za082f.eps
za083f.eps
Advertisement
Table of Contents
