AS-i 3.0 PROFINET Gateway with integr. Safety Monitor
Electrical connection
9.7
Safe coupling via Ethernet (VBG-PN-K30-DMD-S16-EV)
The device supports Safe Link via Ethernet. In order to establish a safe coupling
between several devices, they should be connected via the ethernet diagnostics
interface to a switch.
Information!
Please refer here to the information in the section <Safe Link>.
9.8
Chip card
The configuration is stored in a fixed installed EEPROM and can be overwritten
by the chip card. The chip card does not have to be inserted in operation.
Warning!
Power must always be turned off when removing or inserting the chip card!
56
Switch
ASIMON 3 G2
...