4. Replacement and Adjustment
Image Fusing
• Make sure that the fusing unit is cool before you touch it. The fusing unit can be very hot.
• Make sure to restore the insulators, shields, etc after you service the fusing unit.
Fusing Unit
1. Open the front cover.
4
2. Hold the fusing unit lock levers [A].
3. Fusing unit [B]
After installing a new fusing unit
This unit has the new unit detection function in itself. No operation is required to reset the fusing unit
counter. However, the new unit detection function of this unit automatically resets the transfer unit
counter.
If a new fusing unit is installed without a new transfer unit;
Enter the SP mode, and then execute the SP7-805-022 to recalls the transfer unit previous counter.
Fusing Lamp
1. Fusing unit (
58
p.58)