Installing And Configuring The Sitop Ups1600 In Step 7 V5 - Siemens SITOP UPS1600 Getting Started

Installing and configuring the SITOP UPS1600 in
STEP 7 V5
Preconditions
● STEP 7 V5 is open and a project with an S7 IO controller has been created.
● The DDF of the UPS1600 is installed correctly.
● The UPS1600 is assigned to an S7 IO controller as IO device.
Placing SITOP UPS1600
1. Open the "HW Config" window.
2. Select the "Options > Customize..." menu command.
3. Check whether the option "Display object properties automatically while inserting" is
SITOP UPS1600 under STEP 7 V5
Getting Started,
The "Customize" dialog box opens.
active. If necessary, select the checkbox.
5
17