Table of Contents
Advertisement
Figure 27. Removing a cooling fan module
WARNING:
Ensure not to tilt or rotate the cooling fan module while removing from the system.
Next steps
1.
Replace a cooling fan
module.
Installing a cooling fan module
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
2. Follow the procedure listed in
Before working inside your
system.
3. If installed,
remove the air
shroud.
Steps
1. Align and place the fan module connector horizontally with the connector on the system board.
NOTE:
The procedure to install standard, high performance, or very high performance fan module is same.
2. Press the touch point on the cooling fan module until firmly connected.
54
Installing and removing system components
Advertisement
Table of Contents
