Table of Contents
Advertisement
Option
CCX as NUMA Domain
Minimum SEV-ES ASID
x2APIC Mode
Number of CCDs per Processor
Number of Cores per CCD
Processor Core Speed
Processor n
Table 16. Processor n details
Option
Family-Model-Stepping
Brand
Level 2 Cache
Level 3 Cache
Number of Cores
Microcode
SATA Settings
To view the SATA Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS > SATA
Settings.
Table 17. SATA Settings details
Option
Embedded SATA
Security Freeze Lock
Write Cache
Port n
26
Pre-operating system management applications
Description
Enables or disables the CCX as NUMA Domain. This option is set to
Disabled by default.
Determines the number of Secure Encrypted Virtualization ES and
non ES available Address Space IDs. This option is set to 1 by
default.
Enable or disable x2APIC mode. This option is set to Enabled by
default.
Controls the number of enabled CCDs in each processor. This
option is set to All by default.
specifies the number of cores per CCD. This option is set to All by
default.
Specifies the maximum core frequency of the processor.
The following settings are displayed for each processor installed in
the system:
Description
Specifies the family, model, and stepping of the processor as
defined by AMD.
Specifies the brand name.
Specifies the total L2 cache.
Specifies the total L3 cache.
Specifies the number of cores per processor.
Specifies the processor microcode version.
Description
Enables the embedded SATA option to be set to Off, AHCI mode , or RAID modes. This
option is set to AHCI Mode by default.
NOTE:
1. You might also need to change the Boot Mode setting to UEFI. Otherwise,
you should set the field to Non-RAID mode.
2. No ESXi and Ubuntu OS support under RAID mode.
Sends Security Freeze Lock command to the embedded SATA drives during POST. This
option is applicable only for AHCI Mode. This option is set to Enabled by default.
Enables or disables the command for the embedded SATA drives during POST. This option is
set to Disabled by default.
Sets the drive type of the selected device.
For AHCI Mode or RAID Mode, BIOS support is always enabled.
NOTE:
Depending on the number of CPUs, there might
be up to n processors listed.
Advertisement
Table of Contents
