Cooling Fan Specifications; System Battery Specifications; Expansion Card Riser Specifications; Memory Specifications - Dell EMC PowerEdge R6525 Installation And Service Manual

Hide thumbs Also See for PowerEdge R6525:
Table of Contents

Advertisement

For more information about the specific versions and additions, see https://www.dell.com/support/home/Drivers/SupportedOS/
poweredge-r6525.

Cooling fan specifications

The PowerEdge R6525 system supports up to four standard (STD), high performance (HPR), or very high performance (VHP) dual
cooling fan modules.
Figure 100. Dual fan module
NOTE:
Mixing of STD, HPR, or VHP fan is not supported.
NOTE:
The STD, HPR, or VHP fan installation depends on the system configuration. For more information about the
supported fan configuration or matrix, see

System battery specifications

The PowerEdge R6525 system supports CR 2032 3.0-V lithium coin cell system battery.

Expansion card riser specifications

The PowerEdge R6525 system supports up to four PCI express (PCIe) Gen 4 expansion cards.
Table 55. Expansion card slots supported on the system board
PCIe slot
Risers
Slot 1
R2a (Riser 2)
Slot 1
R1a (Riser 1)
Slot 1
R2b (Riser 2)
Slot 2
R2a (Riser 2)
Slot 2
R2b (Riser 2)
Slot 2
R4c + R4d (Riser 4)
Slot 3
R3a (Riser 3)

Memory specifications

The PowerEdge R6525 system supports the following memory specifications for optimized operation.
Thermal restriction
Riser width
PCIe slot height
x32 PCIe
Low profile
x16 PCIe
Full height
x32 PCIe
Low profile
x32 PCIe
Low profile
x32 PCIe
Low profile
x16 PCIe
Full height
x16 PCIe
Low profile
matrix.
PCIe slot length
Half length
3/4th length
Half length
Half length
Half length
3/4th length
Half length
Slot width
x16
x16
x16
x16
x16
x16
x16
Technical specifications
127

Advertisement

Table of Contents
loading

Table of Contents