Table of Contents
Advertisement
Figure 25. Removing the air shroud
Next steps
1.
Replace the air
shroud.
Installing the air shroud
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Align the slot on the air shroud with the standoff on the system.
2. Lower the air shroud into the system until it is firmly seated.
NOTE:
The air shroud is required for the standard heat sink configuration. For the L-type heat sink configuration, air
shroud is not supported.
52
Installing and removing system components
Safety
instructions.
Before working inside your
system.
Advertisement
Table of Contents
