Table of Contents
Advertisement
Figure 89. Removing the OCP card
Next steps
1.
Replace the OCP
card.
Installing the OCP card
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the expansion card
Steps
1. Open the blue latch on the system board.
2. Slide the OCP card into the slot in the system.
3. Push until the OCP card is connected to the connector on the system board.
4. Close the latch to lock the OCP card to the system.
110
Installing and removing system components
Safety
instructions.
Before working inside your
riser.
system.
Advertisement
Table of Contents
