Table of Contents
Advertisement
Figure 56. Placing the processor tray into the rail frame
2. Push the rail frame down until the blue latches lock into place.
Figure 57. Closing the rail frame
3. Secure the force plate to the processor socket base by tightening the screws in the sequence 1, 2, and 3. When all three screws are
fully threaded, the socket is then actuated. The three screws are tightened to a torque value of 12.0 ± 1.2 lbf-in.
NOTE:
The screw numbers are marked on the force plate.
NOTE:
Press the force plate while tightening the screws to avoid tilting of the processor cover out of the processor
socket.
Installing and removing system components
79
Advertisement
Table of Contents
