Table of Contents
Advertisement
Table 25. ISCSI Device1 Settings screen details
Option
Connection 1
Connection 2
Connection 1 Settings
Connection 2 Settings
Connection Order
Integrated Devices
To view the Integrated Devices screen, power on the system, press F2, and click System Setup Main Menu > System BIOS >
Integrated Devices.
Table 26. Integrated Devices details
Option
User Accessible USB Ports
Internal USB Port
iDRAC Direct USB Port
Integrated RAID Controller
Embedded NIC1 and NIC2
Embedded Video Controller
Current State of Embedded Video
Controller
30
Pre-operating system management applications
Description
Enables or disables the iSCSI connection. This option is set to Disable by default.
Enables or disables the iSCSI connection. This option is set to Disable by default.
Enables you to control the configuration for the iSCSI connection.
Enables you to control the configuration for the iSCSI connection.
Enables you to control the order for which the iSCSI connections will be attempted.
Description
Configures the user accessible USB ports. Selecting Only Back Ports On disables
the front USB ports; selecting All Ports Off disables all front and back USB ports;
selecting All Ports Off (Dynamic) disables all front and back USB ports during
POST. This option is set to All Ports On by default.
When user accessible USB ports is set to All Ports Off (Dynamic) the Enable
Front Ports Only option is enabled.
•
Enable Front Ports Only: Enables or disables the front USB ports during the OS
runtime.
The USB keyboard and mouse still function in certain USB ports during the boot
process, depending on the selection. After the boot process is complete, the USB
ports will be enabled or disabled as per the setting.
Enables or disables the Internal USB Port. This option is set to On or Off. This
option is set to On by default.
The iDRAC Direct USB port is managed by iDRAC exclusively with no host visibility.
This option is set to ON or OFF. When set to OFF, iDRAC does not detect any USB
devices installed in this managed port. This option is set to On by default.
Enables or disables the integrated RAID controller. This option is set to Enabled by
default.
Enables or disables the Embedded NIC1 and NIC2 options. If set to Disabled (OS),
the NIC may still be available for shared network access by the embedded
management controller. Configure the Embedded NIC1 and NIC2 option by using
the NIC management utilities of the system.
Enables or disables the use of Embedded Video Controller as the primary display.
When set to Enabled, the Embedded Video Controller will be the primary display
even if add-in graphic cards are installed. When set to Disabled, an add-in graphics
card will be used as the primary display. BIOS will output displays to both the primary
add-in video and the embedded video during POST and pre-boot environment. The
embedded video will then be disabled right before the operating system boots. This
option is set to Enabled by default.
NOTE:
When there are multiple add-in graphic cards installed in the
system, the first card discovered during PCI enumeration is selected as
the primary video. You might have to re-arrange the cards in the slots in
order to control which card is the primary video.
Displays the current state of the embedded video controller. The Current State of
Embedded Video Controller option is a read-only field. If the Embedded Video
Controller is the only display capability in the system (that is, no add-in graphics card
Advertisement
Table of Contents
