Table of Contents
Advertisement
The PowerEdge R6525 system is a 1U rack server that supports:
TM
•
Two AMD EPYC
7002 series processors
•
32 DIMM slots
•
Two redundant AC or DC power supply units
•
Up to 4 x 3.5-inch, 8 x 2.5-inch, or 10 x 2.5-inch SAS, SATA, or NVMe drives.
NOTE:
For more information about how to hot swap NVMe PCIe SSD U.2 device, see the
SSD User's Guide at
www.dell.com/support
Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals and Documents.
NOTE:
All instances of SAS, SATA drives, PCIe SSDs, and NVMe are referred to as drives in this document, unless
specified otherwise.
For more information about supported drives, see the
Topics:
•
Front view of the system
•
Rear view of the system
•
Inside the system
•
Locating the Express Service Code and Service Tag
•
System information label
•
Rail sizing and rack compatibility matrix
Front view of the system
Figure 1. Front view of the 10 x 2.5-inch drive system
Table 1. Features available on the front of the system
Item
Ports, panels, and slots Icon
1
Left control panel
8
System overview
Browse all Products > Data Center Infrastructure > Storage Adapters &
Drive specifications
Description
N/A
Contains the system health, system ID, status LED, and the iDRAC
Quick Sync 2 (wireless) indicator.
•
•
System overview
section.
NOTE:
The iDRAC Quick Sync 2 indicator is available only
on certain configurations.
Status LED: Enables you to identify any failed hardware
components. There are up to five status LEDs and an overall
system health LED (Chassis health and system ID) bar. For more
information, see the Status LED indicators section.
Quick Sync 2 (wireless): Indicates a Quick Sync enabled system.
The Quick Sync feature is optional. This feature allows
management of the system by using mobile devices that are
called as OpenManage Mobile (OMM) feature. Using iDRAC
Dell Express Flash NVMe PCIe
2
Advertisement
Table of Contents
