Table of Contents
Advertisement
Installing the expansion card risers
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. If removed,
install the expansion cards into the expansion card
Steps
1. Holding the edges or the touch points, align the holes on the expansion card riser with the guides on the system board.
2. Lower the expansion card riser into place and press the touch points until the expansion card riser connector is fully seated on the
system board connector.
Figure 65. Installing the expansion card riser (Riser 1)
Figure 66. Installing the expansion card riser (Riser 2)
Safety
instructions.
Before working inside your
system.
risers.
Installing and removing system components
91
Advertisement
Table of Contents
