Headlamp Levelling - Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual

Headlamp flasher
E00506300128
The high-beams flash when the lever is pulled slight-
ly to (2), and will go off when it is released.
When the high-beam is on, the high-beam indica-
tion lamp in the instrument cluster will illuminate.
NOTE
l The high-beams can also flash when the
lamp switch is OFF.
l If you turn the lamps off with the headlamps
set to high-beam, the headlamps are automat-
ically returned to their low-beam setting
when the lamp switch is next turned to the
" " position.

Headlamp levelling

E00517400015
Headlamp levelling switch*
E00517500377
Except for vehicles with discharge headlamps
The angle of the headlamp beam varies depending
upon the load carried by the vehicle.
The headlamp levelling dial can be used to adjust
the headlamp illumination distance (when the low-
er beam is illuminated) so that the headlamps'
glare does not distract other drivers.
Set the dial according to the following table.
LHD
RHD
Instruments and controls
CAUTION
l
Always perform adjustments before driv-
ing.
Do not attempt to adjust while driving, as
it could cause an accident.
NOTE
l When adjusting the beam position, first put
the dial in the "0" position (the highest beam
position).
3-door models
Vehi-
cle
condi-
tion
Switch "0" "0" "2" "3"
posi-
tion
●: 1 person
: Full luggage loading
3
"3" or
"4"
3-33