Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 69

Installing a child restraint system to
the lower anchorage (ISOFIX child re-
straint mountings) and tether anchor-
age*
E00408900387
Lower anchorage location
Your vehicle's rear seat (3-door models)/second
seat (5-door models) is fitted with lower anchorag-
es for attaching a child restraint system with ISO-
FIX mountings.
Tether anchorage locations
There are 2 attachment points on the floor, located
behind the rear seat (3-door models)/second seat (5-
door models). These are for securing a child re-
straint system tether strap to both of the 2 rear (3-
door models)/second (5-door models) seating posi-
tions in your vehicle.
WARNING
l Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used for
adult seat belts, harnesses, or for attach-
ing other items or equipment to the vehicle.
Child restraint system with ISOFIX mountings
The child restraint system is designed only for
seats that incorporate lower anchorages. Retain the
child restraint system using the lower anchorages.
Seat and seat belts
It is not necessary to retain the child restraint sys-
tem using the vehicle's seat belts.
A- Child restraint system connectors
To install
1. Remove any foreign material in or around
the connectors and ensure the vehicle seat
belt is in its normal storage position.
2. Push the child restraint system's connectors
(A) into the slit (B) in accordance with the in-
2
2-31