Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 201

NOTE
l
If the SEEK button (5 or 6) is pressed for
less than 1 second,the radio will try to find
out another broadcast of the same program
type as currently selected.
l If no station is found with your desired PTY,
the display will show "EMPTY" for about
5 seconds and the radio will return to the pre-
vious station.
How to enter PTYs in the memory
E00721400089
As many as 6 PTYs can be entered in the memory.
Follow the steps described below.
1. Press either the TUNE button (7 or 8) to tune
the PTY to be entered in the memory.
2. Press one of the memory select buttons (3)
for 2 seconds or longer. The sound will be
momentarily interrupted while the PTY is be-
ing entered into the memory. The number of
the button corresponding to the entry into the
memory and the PTY are displayed.
3. The preset memory setting is retrieved by
pressing the button and then releasing it with-
in about 2 seconds.
Traffic information
E00721600195
The radio will automatically tune in to traffic infor-
mation broadcasts while receiving FM broadcasts
or playing compact discs.
To select this function:
1. Press the TP button (9). The display will
show TP indicator (14). If the RDS data can
be read, the display will show RDS indicator
(11). If not, the display will show "NO RDS"
for about 5 seconds.
2. If the radio detects traffic information on ei-
ther the station currently selected or another
station, the display will show "TRAF INF"
for 5 seconds followed by a 2-second indica-
tion of the frequency. Then, it will show the
name of the station broadcasting the traffic in-
formation to which you will listen. The vol-
ume level is set separately for listening to nor-
mal audio programs and for listening to traf-
fic information. The volume level will there-
fore change automatically to that set when an
emergency broadcast or traffic information
broadcast was last received. When the traffic
information broadcast is over, the radio will
return to the previously received program
and to the corresponding volume level.
3. Press the TP button (9) to return to the previ-
ous condition.
NOTE
l While "TP" is illuminated, the radio stops on-
ly at TP stations even if the TUNE button (7
or 8) is pressed.
For pleasant driving
TP (Traffic information Program) search function
E00721800100
The traffic information program search function is
turned on (with the TP indicator (14) shown on the
display), if:
l The RDS is off for 45 seconds due to a weak
signal.
l The station is changed to another station with-
out a TP signal and then 45 seconds elapse.
When turning on, 5 beeps will be heard and a new
TP station will be searched for.
5
5-19