Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 176

Table of Contents

Advertisement

Starting and driving
To operate
To operate the system, move the gearshift lever to
the "R" (Reverse) position (with M/T) or the selec-
tor lever to the "R" (REVERSE) position (with
A/T) while the ignition switch is in the "ON" posi-
tion. To stop the operation, push the "SONAR"
switch.
LHD
RHD
4
The "SONAR OFF" indication lamp will illumi-
nate to indicate that the system has stopped operat-
ing.
4-50
It will flash in case there is a malfunction in the sys-
tem. For details, refer to ""SONAR OFF" indica-
E00615700086
tion lamp" on page 4-51.
To have the system operating again, push the "SO-
NAR" switch again. When the system is operating
again, the buzzer sounds once and the "SONAR
OFF" indication lamp turns off.
NOTE
l
The "SONAR OFF" indication lamp flashes
once when the ignition switch is turned to
the "ON" position.
The warning buzzer sounds when the system de-
tects an obstacle during operation.
NOTE
l
After pushing the "SONAR" switch, revers-
ing sensor system operation differs accord-
ing to the detection area setting.
• Setting when towing bar is not equipped
When the gearshift lever is moved to the
"R" (Reverse) position (with M/T) or the
selector lever is moved to the "R" (RE-
VERSE) position (with A/T), the revers-
ing sensor system will operate even if cor-
ner sensor operation was stopped by push-
ing the "SONAR" switch.
• Setting when towing bar is equipped
When reversing sensor system operation
was stopped by pushing the "SONAR"
switch, the reversing sensor system will
not operate until the engine has been stop-
ped even if the gearshift lever is moved
to the "R" (Reverse) position (with M/T)
or the selector lever is moved to the "R"
(REVERSE) position (with A/T).
To resume reversing sensor system opera-
tion, push the "SONAR" switch or stop
and restart the engine, and then move the
gearshift lever is moved to the "R" (Re-
verse) position (with M/T) or the selector
lever to the "R" (REVERSE) position
(with A/T).
Warning for obstacles
If there is an obstacle behind the vehicle, a warning
buzzer sounds to indicate the distance between the
vehicle and the obstacle.
Corner sensor
Vehicle to obstacle dis-
Warning sound cycle
tance
Approx. 50 to 40 cm
Intermittent
Approx. 40 to 25 cm
Fast intermittent
Within approx. 25 cm
Continuous

Advertisement

Table of Contents
loading

Table of Contents