Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 54

Seat and seat belts
6. Fold down the stands (F).
2
7. Refit the luggage floor board.
To replace
1. Remove the luggage floor board. And then
raise the stands.
2. Raise the seat forward until you hear a
"click" and the seat locks securely.
3. Push knob (A) forward, and raise the seat-
back until it locks securely into place.
2-16
After the operation, push lightly on the seat-
back to confirm that it has actually been se-
cured.
4. Refit the luggage floor board and head re-
straints.
Removing the third seat
E00404200177
To create more luggage space, you can remove the
third seat.
CAUTION
l For safety, do not allow children to re-
move or refit the seat.
l Be careful not to trap your hands or feet
when removing or refitting the seat. Also,
be careful not to drop or trip over the
seat. If necessary, have someone help you
remove it.
To remove
1. Remove the head restraints. Refer to "Head
restraints" on page 2-11.
2. Pull up knob (A) on the side of the seatback,
then tilt the seatback forward.
3. Push lever (B) forward, then tilt the seatback
forward until the seatback touches the seat
cushion.