Outside Rear-View Mirrors - Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual

Type 2
When the headlamps of the vehicles behind you are
very bright, the reflection factor of the rear-view
mirror is automatically changed to reduce the glare.
When the ignition switch is turned to the "ON" po-
sition, the reflection factor of the mirror is automat-
ically changed.
NOTE
l Do not hang items on, or spray glass cleaner
on the sensor (1), as reduced sensitivity
could result.

Outside rear-view mirrors

E00600900484
Compound curved-surface mirror*
On the driver's side, a compound curved-surface
mirror is used, while on the front passenger's side,
a single curved-surface mirror is used.
1- Compound curved-surface mirror
2- Single curved-surface mirror
While the single curved-surface mirror has a fixed
curvature, the compound curved-surface mirror has
different curvatures between the inner and outer
sides of the boundary line (A).
The inner side of the boundary line provides the
same vision as that available from an ordinary door
mirror.
However, the outer side of the boundary line pro-
vides a wider angle of vision compared to an ordi-
nary door mirror.
Starting and driving
WARNING
l The sense of distance that you get from
an object you see on the inner side of the
mirror boundary line differs from the
sense of distance that you get from an ob-
ject you see on the outer side.
An object you see on the outer side of the
boundary line of the mirror will look far-
ther away than actually is as compared
with an object you see on the inner side.
To adjust the mirror position
E00601000105
The outside rear-view mirrors can be operated
when the ignition switch is in the "ON" or "ACC"
position.
WARNING
l Do not attempt to adjust the rear-view
mirrors while driving. This can be danger-
ous.
Always adjust the mirrors before driving.
l Your vehicle is equipped with convex
type mirrors. Please take into considera-
tion, that objects you see in the mirror
will look smaller and farther away com-
pared to a normal flat mirror.
Do not use this mirror to estimate dis-
tance of following vehicles when changing
lanes.
4
4-09