Specifications - Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual

Selection of engine oil
Petrol-powered vehicles
l Select engine oil of the proper SAE viscosity
number according to the atmospheric temper-
ature.
SAE 0W-30, 5W-30, and 5W-40 engine oils
can only be used if they meet ACEA A3/B3,
A3/B4 or A5/B5 and API SG (or higher) spec-
ifications.
l
Use engine oil conforming to the following
classification:
• API classification: "For service SG" or
higher
• ILSAC certificated oil
• ACEA classification:
"For service A1/B1, A3/B3, A3/B4 or
A5/B5"
NOTE
l
Use of additives is not recommended since
they may reduce the effectiveness of addi-
tives already included in the engine oil. It
may result in failure of the mechanical assem-
bly.
Diesel-powered vehicles
Vehicles without diesel particulate filter (DPF)
l Select engine oil of the proper SAE viscosity
number according to the atmospheric temper-
ature.
l Use engine oil conforming to the following
classification:
• ACEA classification:
"For service A1/B1 A3/ B3, A3/B4,
A5/B5, C1, C2, C3 or C4"
• API classification:
"For service CD" or higher
• JASO classification:
"For service DL-1"
If those classifications are not available, con-
tact a MITSUBISHI MOTORS authorized
Service Point.
Maintenance
NOTE
l
Use of additives is not recommended since
they may reduce the effectiveness of addi-
tives already included in the engine oil. It
may result in failure of the mechanical assem-
bly.
Vehicles with diesel particulate filter (DPF)
l Select engine oil of the proper SAE viscosity
number according to the atmospheric temper-
ature.
l Use engine oil conforming to the following
classification:
• ACEA classification:
"For service C1, C2, C3 or C4"
• JASO classification:
"For service DL-1"
If those classifications are not available, con-
tact a MITSUBISHI MOTORS authorized
Service Point.
8
8-05