Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 224

For pleasant driving
To find the start of each track on a disc for playback
Press the SCAN button (14). "SCAN" will appear
on the display and the autochanger will play back
the first 10 seconds of each track on the selected disc.
The track number will blink while the scan mode is
selected. To exit the scan mode, press the SCAN
button again.
NOTE
l Once all tracks on the disc have been scan-
ned, playback of the disc will restart from the
beginning of the track that was playing when
scanning started.
l The scan mode will be cancelled when radio
or CD operation is selected.
l With a disc that contains both CD-DA and
MP3 files, the scan mode causes only files of
the same format (CD-DA only or MP3 files
only) to be played.
CD text and MP3 title display
5
This autochanger can display CD text and MP3 ti-
tles including ID3 tag information.
5-42
CD text
The autochanger can display disc and track titles
for discs encoded with disc and track title informa-
tion. Press the DISP button (3) repeatedly to make
selections in the following sequence: disc name →
track name → normal display mode.
Example
Disc
name
Track
name
NOTE
l The display can show up to 16 characters. If
E00725000520
a disc name or track name has more than 16
characters, press the PAGE button (10) to
view the next 16 characters.
l When there is no title information to be dis-
played, the display shows "NO TITLE".
l Characters that the CD player cannot display
are shown as " ".
MP3 title
The CD player can display folder and track titles
for discs encoded with folder and track informa-
tion. Press the DISP button (3) for less than
1 second repeatedly to make selections in the fol-
lowing sequence: folder name → track name → nor-
mal display mode.
Example
Folder
name
Track
name
ID3 tag information
The autochanger can display ID3 tag information
for files that have been recorded with ID3 tag infor-
mation.
1. Press the DISP button (3) for 2 seconds or lon-
ger to switch to the ID3 tag information.
"TAG" indicator will appear on the display.
2. Then press the DISP button for less than
1 second repeatedly to make selections in the
following sequence: album name → track
name → artist name → normal display mode.
NOTE
l To return from ID3 tag information to the
folder name, press the DISP button (3) again
for 2 seconds or longer.