Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 57

1. If your vehicle is equipped with a rear shelf (3-
door models) / cargo area cover (5-door mod-
els), remove it before performing the follow-
ing steps. Refer to "Rear shelf (3-door mod-
els)" on page 5-119 and "Cargo area cover (5-
door models)" on page 5-120.
2. Remove the head restraints from the front
seats.
If your vehicle is equipped with the third seat
(5-door models), store the third seat into the
luggage floor box.
Refer to "Head restraints" on page 2-11 and
"Storage of the third seat" on page 2-14.
3. Slide the front seats fully forward, then tip
their seatbacks backward.
On 5-door models, slide the front seats back-
ward until their seatbacks touch the second
seat.
Refer to "To adjust forward or backward" on
page 2-05 and "To recline the seatback" on
page 2-06.
4. On 3-door models, remove the head re-
straints from the rear seat.
Recline the rear (3-door models) / second (5-
door models) seatback backward. Refer to
"To recline the seatback" on page 2-10.
Seat and seat belts
NOTE
l On 5-door models, each of the second seat's
sidebacks (A) is foldable. When either side
of the seatback is reclined to a new position,
its sideback automatically folds inward ac-
cordingly.
5. On 3-door models, store the front head re-
straints and rear centre head restraint be-
tween the front seats.
And store the rear outboard head restraints
on the side of the rear seat.
On 5-door models, store the front head re-
straints between the front seats.
The flat seat configuration is now complete.
2
2-19