Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 257

l You can change the music player to be con-
nected by pressing and releasing the
SPEECH button and then saying "Select mu-
sic player" while the list is being read.
Changing a device tag
E00760900018
You can change the device tag of a paired cellular
phone or music player.
Follow the steps below to change a device tag.
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Pairing Options."
4. The voice guide will say "Select one of the
following: pair, edit, delete, or list." Say "Ed-
it."
5. The voice guide will say "Please say," and
read out the numbers of the Bluetooth
ces and device tags of corresponding devices
in order, starting with the Bluetooth
has been most recently connected.
After all paired device tags have been read,
the voice guide will say "Which device,
please?" Say the number of the device tag
you want to change.
NOTE
l You can press and release the SPEECH but-
ton while the list is being read, and immedi-
ately say the number of the device tag you
want to change.
6. The voice guide will say "New name,
please." Say the name you want to register as
a new device tag.
When the confirmation function is on, the
voice guide will say "<New device tag>. Is
this correct?" Answer "Yes."
Answer "No," you can say the new device
tag you want to register again.
7. The device tag is changed.
When the change is complete, the voice
guide will say "New name saved" and then
the system will return to the main menu.
Operating a music player connected
®
via Bluetooth
For the operation of a music player connected via
®
devi-
®
Bluetooth , refer to "To play tracks from a Blue-
®
tooth device" on page 5-54.
®
that
How to make or receive hands-free calls
You can make or receive hands-free calls using a
®
Bluetooth compatible cellular phone connected to
®
the Bluetooth 2.0 interface.
You can also use the phone books in the Blue-
®
tooth 2.0 interface to make calls without dialling
telephone numbers.
To make a call ® p. 5-75
Send function ® p. 5-76
Receiving calls ® p. 5-77
Mute function ® p. 5-77
Switching between hands-free mode and private
mode ® p. 5-77
To make a call
You can make a call in the following 3 ways using
®
the Bluetooth 2.0 interface:
Making a call by saying a telephone number, mak-
ing a call using the Bluetooth
phone book, and making a call by redialing.
Making a call by using the telephone number
You can make a call by saying the telephone number.
1. Press the SPEECH button.
2. Say "Dial."
3. After the voice guide says "Number please,"
say the telephone number.
4. The voice guide will say "Dialing <number
recognized>."
®
The Bluetooth 2.0 interface will then make
the call.
When the confirmation function is on, the sys-
tem will confirm the telephone number
E00761000016 again. To continue with that number, answer
"Yes."
To change the telephone number, answer
"No." The system will say "Number please"
then say the telephone number again.
E00761100017
NOTE
l In the case of English, the system will recog-
nise both "zero" and "oh" (Letter "o") for the
number "0." Refer to "Commands and alter-
natives" on page 5-84 for details.
l ®
The Bluetooth 2.0 interface supports num-
bers (0 to 9) and characters (+, # and *).
l The maximum supported telephone number
length is as follows:
• International telephone number: + and tel-
ephone numbers (to 18 digits).
• Except for international telephone num-
ber: telephone numbers (to 19 digits).
E00761200021
For pleasant driving
®
2.0 interface's
5
5-75