Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 256

For pleasant driving
5. The selected phone will be connected to the
®
Bluetooth 2.0 interface. The voice guide
will say "<device tag> selected" and then the
system will return to the main menu.
To select a music player
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Select music player."
4. After the voice guide says "Please say," the
numbers of the music players and device tags
of corresponding music players will be read
out in order, starting with the music player
that has been most recently connected.
Say the number of the music player that you
want to connect to.
When the confirmation function is on, the sys-
tem will ask you again whether the music
player that you want to connect to is correct.
Answer "Yes" to continue and connect to the
music player.
Answer "No," and the voice guide will say
"Please say."
5
Say the number of the music player that you
want to connect to.
NOTE
l You can connect to a music player at any
time by pressing the SPEECH button and say-
ing the number, even before all of the paired
numbers and device tags of corresponding mu-
sic players are read out by the system.
5. The selected music player will be connected
®
to the Bluetooth 2.0 interface.
The voice guide will say "<device tag> selec-
ted" and then the system will return to the
main menu.
5-74
Deleting a device
Use the following procedure to delete a paired Blue-
® ®
tooth device from the Bluetooth 2.0 interface.
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Pairing Options."
4. The voice guide will say "Select one of the
following: pair, edit, delete, or list." Say "De-
lete."
5. After the voice guide says "Please say," the
numbers of the devices and device tags of cor-
responding devices will be read out in order,
starting with the device that has been most re-
cently connected. After it completes reading
all pairs, the voice guide will say "or all."
Say the number of the device that you want
to delete from the system.
If you want to delete all paired phones from
the system, say "All."
6. For confirmation purposes, the voice guide
will say "Deleting <device tag> <number>.
Is this correct?" or "Deleting all devices. Is
this correct?"
Answer "Yes" to delete the phone(s).
Answer "No," the system will return to Step
4.
7. The voice guide will say "Deleted," and then
the system will end the device deletion proc-
ess.
NOTE
l
If the device deletion process fails for some
reason, the voice guide will say "Delete
failed" and then the system will cancel delet-
ing the device.
®
To check a paired Bluetooth device
E00760800017
®
You can check a paired Bluetooth device by fol-
lowing the steps below.
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Pairing Options."
4. The voice guide will say "Select one of the
following: pair, edit, delete, or list." Say
"List."
5. The voice guide will read out device tags of
corresponding devices in order, starting with
®
the Bluetooth device that has been most re-
cently connected.
6. After the device tags of all paired Bluetooth
devices have been read, the system will say
"End of list, would you like to start from the
beginning?"
To hear the list again from the beginning, an-
swer "Yes." When you are done, answer
"No" to return to the main menu.
NOTE
l If you press and release the SPEECH button
and say "Continue" or "Previous" while the
list is being read, the system will advance or
rewind the list.
Say "Continue" to proceed to the device with
the next highest number or "Previous" to re-
turn to the phone with the previous number.
l You can change the device tag by pressing
and releasing the SPEECH button and then
saying "Edit" while the list is being read.
l
You can change the phone to be connected
by pressing and releasing the SPEECH but-
ton and then saying "Select phone" while the
list is being read.
®