Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 120

Instruments and controls
To adjust intermittent intervals
With the lever in the "INT" (speed-sensitive) posi-
tion, the intermittent intervals can be adjusted by
turning the knob (A).
3
1- Fast
2- Slow
NOTE
l The speed-sensitive-operation function of the
windscreen wipers can be deactivated.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Author-
ized Service Point.
Misting function
The misting function can be used when the ignition
switch is in the "ON" or "ACC" position.
3-38
The wipers will operate once if the wiper lever is
raised to the "MIST" position and released. This op-
eration is useful when it is drizzling, etc. The wip-
ers will continue to operate while the lever is held
in the "MIST" position.
Vehicle with rain sensor
E00526400255
The windscreen wipers can be operated with the ig-
nition switch in the "ON" or "ACC" position.
If the blades are frozen to the windscreen or rear
window, do not operate the wipers until the ice has
melted and the blades are freed, otherwise the wip-
er motor may be damaged.
MIST- Misting function
The wipers will operate once.
OFF- Off
AUTO- Auto-wiper control
Rain sensor
The wipers will automatically operate
depending on the degree of wetness on
the windscreen.
LO- Slow
HI- Fast
Rain sensor
Can only be used when the ignition switch is in the
"ON" position.
If the lever is put in the "AUTO" position, the rain
sensor (A) will detect the extent of rain (or snow,
other moisture, dust, etc.) and the wipers will oper-
ate automatically.
Keep the lever in the "OFF" position if the wind-
screen is dirty and the weather is dry.