Table of Contents
Advertisement
Maintenance
2. Remove the socket and bulb assembly (A) to-
gether by turning it anticlockwise and then re-
move the bulb by pulling it out.
3. To install the bulb, perform the removal
steps in reverse.
8
8-28
NOTE
l
When installing the lens, make sure the direc-
tion of the lens is installed as shown in the il-
lustration.
*: Right side of the vehicle
Room & map lamps
E01004700524
1. Insert a straight blade (or minus) screwdriver
with a cloth over its tip into the lens and pry
gently to remove it.
2. Remove the bulb from the lamp holder.
3. To install the bulb, perform the removal
steps in reverse.
NOTE
l
When installing the lens, align the tab on the
lens with the hole on the vehicle side.
Rear personal lamps
E01005200252
When replacing a bulb, keep the interior lamp
switch in the " " (OFF) position.
Advertisement
Chapters
Table of Contents
