Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 251

Steering control switch
E00727200106
1- Volume up button
2- Volume down button
3- SPEECH button
4- PICK-UP button
5- HANG-UP button
Volume up button
Press this button to increase the volume.
Volume down button
Press this button to decrease the volume.
SPEECH button
l Press this button to change to voice recogni-
tion mode.
While the system is in voice recognition
mode, "Listening" will appear on the audio
display.
l If you press the button briefly while in voice
recognition mode, it will interrupt prompting
and allow voice command input.
Pressing the button longer will deactivate the
voice recognition mode.
l Pressing this button briefly during a call will
enable voice recognition and allow voice com-
mand input.
PICK-UP button
l
Press this button when an incoming call is re-
ceived to answer the telephone.
l
When another call is received during a call,
press this button to put the first caller on
hold and talk to the new caller.
• In such circumstances, you can press the
button briefly to switch between callers.
You will switch to the first caller and the
other caller will be put on hold.
• To establish a three-way call in such sit-
uations, press the SPEECH button to en-
ter voice recognition mode and then say
"Join calls."
HANG-UP button
l Press this button when an incoming call is re-
ceived to refuse the call.
l Press this button during a call to end the cur-
rent call.
When another call is on hold, you will
switch to that call.
l If this button is pressed in the voice recogni-
tion mode, the voice recognition mode will
be deactivated.
For pleasant driving
NOTE
l
When you press the SPEECH button to enter
voice recognition mode with a cellular phone
paired to the system, current information on
the cellular phone, such as "remaining bat-
tery life," "signal strength" or "roaming,"
will be displayed on the audio display.*
*: Some cellular phones will not send this in-
®
formation to the Bluetooth 2.0 interface.
l Call waiting and three-way calls can be used
®
by the Bluetooth 2.0 interface, only if it is
possible to use those services with your cellu-
lar phone.
Voice recognition function
E00727300266
®
The Bluetooth 2.0 interface is equipped with a
voice recognition function.
Simply say voice commands and you can perform
various operations and make or receive hands-free
calls.
®
With the Bluetooth 2.0 interface, voice recogni-
tion is possible for English, French, Spanish, Ital-
ian, German, Dutch and Portuguese. The factory set-
ting is "English."
NOTE
l If the voice command that you say differs
from the predefined command or cannot be
recognised due to ambient noise or some oth-
®
er reason, the Bluetooth 2.0 interface will
ask you for the voice command again up to 3
times.
5
5-69