Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 255

NOTE
l If 7 devices have already been paired, the
voice guide will say "Maximum devices
paired" and then the system will end the pair-
ing process. To register a new device, delete
one device and then repeat the pairing process.
(Refer to "Deleting a device" on page 5-74.)
6. The voice guide will say "Please say a 4-dig-
it pairing code." Say a 4-digit number.
When the confirmation function is on, the sys-
tem will confirm whether the number said is
acceptable. Answer "Yes."
Answer "No" to return to pairing code selec-
tion.
NOTE
l ®
Some Bluetooth devices require a specific
pairing code.
Please refer to the device manual for pairing
code requirements.
l The pairing code entered here is only used
®
for the Bluetooth connection certification.
It is any 4-digit number the user would like
to select.
Remember the pairing code as it needs to be
®
keyed into the Bluetooth device later in the
pairing process.
Depending on the connection settings of the
®
Bluetooth device, this code may have to be
entered each time you connect the Blue-
® ®
tooth device to the Bluetooth 2.0 inter-
face. For the default connection settings, re-
fer to the instructions for the device.
7. The voice guide will say "Start pairing proce-
dure on the device. See the device manual
for instructions." Enter in the Bluetooth
vice the 4-digit number you have registered
in Step 6.
NOTE
l ®
If the Bluetooth 2.0 interface cannot recog-
®
nize the Bluetooth device, the voice guide
will say "Pairing has timed out" and the pair-
ing process will be cancelled.
Confirm that the device you are pairing sup-
®
ports Bluetooth , and try pairing it again.
l If you enter the wrong number, the voice
guide will say "Pairing failed" and the pair-
ing process will be cancelled.
Confirm the number is right, and try pairing
it again.
8. The voice guide will say "Please say the
name of the device after the beep." You can
assign a desired name for the Bluetooth
vice and register it as a device tag. Say the
name you want to register after the beep.
NOTE
l When the confirmation function is on, after
repeating the device tag you have said, the
voice guide will ask "Is this correct?" An-
swer "Yes."
To change the device tag, answer "No" and
then say the device tag again.
9. The voice guide will say "Pairing complete,"
after which a beep will be played and the pair-
ing process will end.
®
de-
For pleasant driving
Selecting a device
®
If multiple paired Bluetooth devices are available
in the vehicle, the cellular phone or music player
most recently connected is automatically connected
®
to the Bluetooth 2.0 interface.
You can connect to the other cellular phone or mu-
sic player by following setting change procedures.
To select a cellular phone
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Select phone."
4. After the voice guide says "Please say," the
numbers of the cellular phones and device
tags of corresponding cellular phones will be
read out in order, starting with the cellular
phone that has been most recently connected.
Say the number of the cellular phone that
you want to connect to.
®
de-
When the confirmation function is on, the sys-
tem will ask you again whether the phone
that you want to connect to is correct. An-
swer "Yes" to continue and connect to the cel-
lular phone.
Answer "No," and the voice guide will say
"Please say."
Say the number of the phone that you want
to connect to.
NOTE
l You can connect to a phone at any time by
pressing the SPEECH button and saying the
number, even before all of the paired num-
bers and device tags of corresponding cellu-
lar phones are read out by the system.
E00760700016
5
5-73