Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 252

For pleasant driving
l For best performance and further reduction
of ambient noise, the vehicle windows
should be closed while engaging the voice rec-
ognition function.
l Some voice commands have alternative com-
mands. Refer to "Commands and alterna-
tives" on page 5-84.
l Depending on the selected language, some
functions may not be available.
Selecting the language
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Language."
4. The voice guide will say "Select a language:
English, French, Spanish, Italian, German,
Dutch or Portuguese". Say the desired lan-
guage. (Example: "English")
5. The voice guide will say "English (French,
Spanish, Italian, German, Dutch or Portu-
guese) selected. Is this correct?" Say "Yes."
If you say "No," the system will return to
5 Step 4.
NOTE
l The voice guide will repeat the same mes-
sage twice. The first message is in the cur-
rent language, and the second message is in
the selected language.
l
If many entries are registered in the vehicle
phone book, changing the language will take
a longer time.
l Changing the language deletes the mobile
phone book imported to the Bluetooth
interface. If you wish to use it, you will have
to import it again.
5-70
6. When the voice guide says "English (French,
Spanish, Italian, German, Dutch or Portu-
guese) selected," the language change proc-
ess will be completed and the system will re-
turn to the main menu.
Useful voice commands
Help function
®
The Bluetooth 2.0 interface is equipped with a
help function.
If you say "Help" when the system is waiting for a
voice command input, the system will tell you a list
of the commands that can be used under the circum-
stances.
Cancelling
There are 2 cancel functions.
If you are at the main menu, say "Cancel" to exit
®
from the Bluetooth 2.0 interface.
If you are anywhere else within the system, say
"Cancel" to return to the main menu.
Confirmation function setting
®
The Bluetooth 2.0 interface is equipped with a con-
firmation function.
With the confirmation function activated, you are
given more opportunities than normal to confirm a
command when making various settings to the Blue-
®
tooth 2.0 interface. This allows you to decrease
the possibility that a setting is accidentally changed.
The confirmation function can be turned on or off
®
2.0
by following the steps below.
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Confirmation prompts."
4. The voice guide will say "Confirmation
prompts are <on/off>. Would you like to turn
confirmation prompts <off/on>."
Answer "Yes" to change the setting or an-
swer "No" to keep the current setting.
5. The voice guide will say "Confirmation
prompts are <off/on>" and then the system
will return to the main menu.
E00760000019
E00760100010
Security function
It is possible to use a password as a security func-
tion by setting a password of your choice for the
®
Bluetooth 2.0 interface.
When the security function is turned on, it is neces-
sary to make a voice input of a 4-digit password in
order to use all functions of the Bluetooth
terface, except for reception.
E00760200011
Setting the password
Use the following procedure to turn on the security
function by setting a password.
1. Press the SPEECH button.
2. Say "Setup."
3. Say "Password."
4. The voice guide will say "Password is disa-
E00760400013
bled. Would you like to enable it?" Answer
"Yes."
Answer "No" to cancel the setting of the pass-
word and return to the main menu.
5. The voice guide will say "Please say a 4-dig-
it password.
Remember this password. It will be required
to use this system."
Say a 4-digit number which you want to set
as a password.
E00760500030
®
2.0 in-