Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 172

Starting and driving
Accelerator pedal
While driving at the set speed, use the accelerator
pedal to reach your desired speed and then press
the "COAST SET" switch (B) and release the
switch momentarily to set a new desired cruising
speed.
4
To decrease the set speed
There are 2 ways to decrease the set speed.
"COAST SET" switch
Press and hold the "COAST SET" switch (B) while
driving at the set speed, and your speed will slow
down gradually.
4-46
When you reach your desired speed, release the
switch. Your new cruising speed is now set.
To slow down your speed in small amounts, press
the "COAST SET" switch for less than about
1 second and release it.
Each time you press the "COAST SET" switch,
your vehicle will slow down by about 1.6 km/h
(1 mph).
E00609500412
Brake pedal
While driving at the set speed, use the brake pedal,
which disengages the cruise control, then press the
"COAST SET" switch (B) and release the switch
momentarily to set a new desired cruising speed.