Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 356

Maintenance
4. To install the bulb, perform the removal
steps in reverse.
NOTE
l When refitting the clips of the cover, push
the pin (H).
The clips (I and J) must be fitted to the origi-
nal positions as shown in the illustration.
8
8-26
Rear combination lamps
E01004200659
On corner side
1. Remove the screws that hold the lamp unit.
2. Slide the lamp unit out sideways to remove it.
Left side
Right side
3. Remove the socket and bulb assemblies by
turning it anticlockwise.
Remove the bulb by pulling it out.
3-door models 5-door models
A- Rear turn-signal lamp*
B- Stop and tail lamp*
Stop lamp*
C- Reversing lamp
4. To install the bulb, perform the removal
steps in reverse.
On bumper*
1. Remove the lens mounting screws.