Turn-Signal Lever - Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual

CAUTION
l
If the warning lamp stays on or does not
illuminate when the ignition switch is
turned "ON", it indicates that the auto-
matic headlamp levelling device is not
functioning.
We recommend you to have your vehicle
inspected.

Turn-signal lever

E00506500928
1- Turn-signals
When making a normal turn, use position
(1). The lever will return automatically when
cornering is completed.
2- Lane-change signals
When changing lanes, use position (2). It
will return to the neutral position when re-
leased.
Also, when you move the lever to (2) slight-
ly then release it, the turn-signal lamps and in-
dication lamp in the instrument cluster will
flash 3 times.
NOTE
l If the lamp flashes unusually quickly, the
bulb in a turn-signal lamp may have burned
out. We recommend you to have the vehicle
inspected.
l It is possible to activate the following func-
tions. For further information, we recom-
mend you to consult a MITSUBISHI
MOTORS Authorized Service Point.
Instruments and controls
• Sounding of a buzzer as the turn-signal
lamps flash.
• Flashing of the turn-signal lamps when
the lever is operated with the ignition
switch in the "ACC" position.
• The turn-signal lamps 3-flash function
for lane changes can be deactivated.
• The time required to operate the lever for
the 3-flash function can be adjusted.
3-35
3