Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 357

2. Remove the socket and bulb assembly togeth-
er by turning it anticlockwise, and then re-
move the bulb by pulling it out.
D- Rear turn-signal lamp
E- Tail lamp
3. To install the bulb, perform the removal
steps in reverse.
Rear fog lamp
E01004100371
1. Open the spare wheel garnish (A). (Refer to
"To remove the spare wheel" on page 6-10).
2. Remove the socket and bulb assembly (B) by
turning it anticlockwise, and then remove the
bulb by pulling it out.
3. To install the bulb, perform the removal
steps in reverse.
High-mounted stop lamp (bulb type)*
E01004500535
1. Insert a straight blade (or minus) screwdriver
with a cloth over at the edge of the cover and
pry gently to remove the cover.
Maintenance
2. Remove the socket and bulb assembly togeth-
er by turning it anticlockwise, and then re-
move the bulb by pulling it out.
3. To install the bulb, perform the removal
steps in reverse.
Licence plate lamps
E01004600709
1. Remove the lens mounting screws and re-
move the socket and bulb assembly.
8
8-27