Mitsubishi MOTORS PAJERO OBKE10E1 Owner's Manual page 312

For emergencies
3. Remove the tool and the jack handle from
the holder (D), and take it out.
4. Reverse the removing procedure when stor-
ing the tool, jack and jack handle.
CAUTION
l When removing and storing the items in
the storage compartment, be careful not
to injure your hands or fingers.
6
5-door models
Tool, jack and jack handle are located in the lug-
gage floor box.
1. When the third seat is folded into the lug-
gage floor box, raise the seat forward and re-
turn it to the original position.
Refer to "Storage of the third seat" on page
2-14.
6-08
2. Remove the lid.
3. Remove the tool and the jack handle from
the holder (A), and take it out.
4. Pull the lid to remove it.
5. Remove the securing bolt (B), and then take
out the jack.
6. Reverse the removing procedure when stor-
ing the tool, jack and jack handle.