Configuring The File Parameters - Viavi SmartOTDR 100 User Manual

Code Definition The Code Definition line opens a sub-menu, with
Five different codes can be managed by the SmartOTDR, including a
standard code.
The standard code (TIA) may be displayed but it cannot be modified.
The other codes, called by default USER1, USER2, USER3 and USER4,
can be entirely personalized.
Operator
Use the arrow
measurement.
Comment
In contrast to the other data in this menu, the comment is specific to a
fiber. This line is thus used to enter a new comment and not to display it.
The comment appears at the top of the screen, with the other parameters
of the fiber.
This comment will remain available for the next acquisition, unless it is
deleted. It is also saved when a trace is saved with a comment.
Configuring the
The File storage parameters must be also configured, in order to define
File parameters how the results will be saved on to the SmartOTDR.
In the Setup page, press File soft key (if one parameter is selected in the
current screen, press Top Menu soft key to display the right menu keys
and click on File).
Dir
This parameter cannot be configured, and display the directory selected
by default into which the file(s) will be saved (the last directory selected).
To modify the directory, go to the Explorer page and select another
directory.
User Manual
Chapter 5 Power meter & VFL (Visual Fault Locator)
which the different color codes possible on the instru-
ment can be displayed and modified.
– Edited code
– Code name
– View codes
– Code 1...23
to enter the name of the operator carrying out the
7SMART102 Rev002
Using the Power meter via USB port
selects the code for display or modification.
to give a new name to the code selected, press
the key, which calls up the edit menu.
displays the color codes 1 to 12, 13 to 24 or 25
to 36.
Use the arrow to modify the codes if neces-
sary.
31