Connection To The Power Meter, Vfl And Talkset; Using The Power Meter - Viavi 6000A V2 User Manual

Chapter 5 Power meter, VFL (Visual Fault Locator) & Talkset

Connection to the power meter, VFL and Talkset

Connection to the power meter, VFL and Talkset

Using the Power meter

24
Fig. 10 Optical connectors
The type of optical connector used for the power meter is UPP (Universal
Push Pull), which is compatible with all diameter 2.5 mm connectors (FC,
SC, ST, DIN, E2000, etc.)
Accuracy of measurements
A high degree of accuracy is often required. It is then necessary to
perform a preliminary calibration without the fiber under test to elimi-
nate the losses due to connections as far as this is possible. To do
this, use the «Reference Value» function.
The power meter function is an option chosen at the time of order and
incorporated into the 6000A V2 Platform in the factory.
To activate the function:
H
1 Press the
OME
2 Activate the power meter icon of the Platform
The effect of this action will to be to bring the power meter into use
and to display the Results page for Power Meter.
User Manual 76100000200 Rev. 001
Power meter optical
connection
Talkset optical
VFL
connection
button
.