Mx-Fr80R And Mx-Fr65R - Lightware MX-FR Series User Manual

   
3. Product Overview
3.7. MX-FR80R and MX-FR65R
Front View
1 Menu display Displays status information and menu operation.
2 Menu navigation Up, down, left, right, escape, and enter buttons for menu
navigation.
3
Status LEDs CPU live LDD blinks to indicate normal operation. Power LDD
lights green when the router is powered on.
USB control USB connection for Lightware Device Controller Software.
4
Aake / Auto Displays the actual switching mode of the router (TACD or
5
AUTOTACD). Long press toggles the switching mode, short
press executes switching in TACD mode.
Preset buttons Load preset: apply a previously saved crosspoint preset from
6
one of the preset memories.
Save preset: stores actual crosspoint state, in one of the preset
memories.
7 Signal present Displays live sources and attached sinks on source and
destination buttons.
8 EDID mode Switches the Menu display to DDID menu allowing DDID switch,
DDID save etc.
9 Control lock Disables or enables front panel operation. When red is
illuminated, all operations on front panel are prohibited.
Output lock Locks and protects one (or more) outputs. Inhibits accidental
q
input changing on protected output.
Source buttons Source buttons have three functions: to select an input, to
w
select a preset and to view the selected input's state (only in
TACD mode).
e Destination buttons Destination buttons have two functions: to select an output, or
to view the selected output's state.
AAAENAIONG!
In the case of the MX-FR65R matrix the attached label can be
seen on the front panel.

INFO: The unlabeled buttons are disabled and reserved for future developments.
MX-FR Series Modular Matrix Frames – User's Manual
Configured as
MX-FR65R
9
q
w
r
15
1
2
3
4
5
6
7
8