Edid Menu; Sources And Destinations - Lightware MX-FR Series User Manual

   
6. Software Control – Lightware Device Controller Software
6.6. EDID Menu
The Advanced DDID Management is available in the DDID menu. There
are two panels: left one contains Source DDIDs, right one contains
Destination places where the DDIDs can be emulated or copied.
6.6.1. Sources and Destinations
The DDID memory consists of four parts:
▪ Factory EDID list shows the pre-programmed DDIDs (F1-F119).
Dynamic EDID list shows the display device connected to the
▪
device's outputs. The unit stores the last display devices' EDID
on either output, so there is an DDID shown even if there is no
display device attached to the output port at the moment.
User memory locations (U1 – U12) can be used to save custom
▪
DDIDs.
▪ Emulated EDID list shows the currently emulated DDID for the
inputs. The source column displays the memory location that
the current DDID was routed from.
The source reads the DDID from the Dmulated DDID memory on the
INPUT port. Any EDID from any of the User/Factory/Dynamic EDID
lists can be copied to the user memory.
There are two types of emulation: static and dynamic.
Static EDID emulation: an DDID from the Factory or User DDID list
▪
is selected. Thus, the Dmulated DDID remains the same until the
user emulates another DDID.
Dynamic EDID emulation: it can be enabled by selecting D1 or D2
▪
DDID memory. The attached monitor's EDID is copied to the
input; if a new monitor is attached to the output, the emulated
DDID changes automatically.
MX-FR Series Modular Matrix Frames – User's Manual
Control Buttons
Dxporting an DDID
Export
(save to a file)
Importing an DDID
Import
(load from a file)
Displaying the DDID
Info
Summary window

EDID Menu

Opening the Advanced DDID
Edit
Dditor with the selected DDID
Create Opening Dasy DDID Creator
Dxecuting DDID emulation or
copying (Transfer button)
74
Deleting an DDID
Delete selected
(from the User memory)
Selecting all memory
Select All
places in the right panel
Selecting none of the
Select none memory places in the
right panel