Dvi-Dl Output Port - Lightware MX-FR Series User Manual

   
7. Programmer's Reference
7.9.8.2. Input Port Parameters
Supported Boards:
▪ MX-TPS-IB-A, -AP; MX-TPS-OB-A, -AP
MX-4TPS2-4HDMI-IB-A; MX-4TPS2-4HDMI-IB-AP
▪
▪ MX-HDMI-3D-IB-A; MX-HDMI-3D-OB-A
▪ MXD-UMX-IB
Description: Query or set the analog audio input port parameters (signal levels).
Querying the Parameters
Format
Command {:AUDIN#<in/out>@<S/C/A><I/O>=?}
Response (AUDIN#<in/out>@S<I/O>=<vol>;<bal>;
<gain>;<ph>;<res>;)CrLf
Explanation: The actual setting is in the response; see the legend for the details.
Setting the Parameters
Explanation: The 'Volume' is changed to 0 dB, the others left unchanged.
Format
Command {:AUDIN#<in/out>@<S/C/A><I/O>=<vol>;
<bal>;<gain>;<ph>;x}
Response (AUDIN#<in/out>@S<I/O>=<vol>;<bal>;
<gain>;<ph>;<res>;)CrLf
Legend
Identifier Parameter Description
<vol> Volume level
<bal> Balance
<gain> Gain (input volume level)
The phase invert of the
<ph>
outgoing signal
<res> Reserved
Example
→ {:AUDIN#9@SI=?}
← (AUDIN#9@SI=6300;50;0;0;0;)CrLf
Example
→ {:AUDIN#9@SI=0}
← (AUDIN#9@SI=0;50;0;0;0;)CrLf
Parameter Values
Values are accepted between -63 and 0 dB (step is 1
dB) and rounded. e.g. 6000 = -60 dB; 3625 = -36 dB
Values are accepted between 0 and 100 (step is 1):
e.g. 50 = center (default)
Accepted values: 0, 3, 6, 9, 12, 15, 18, 21, 24
0 = disabled
1 = enabled
MX-FR Series Modular Matrix Frames – User's Manual
7.9.9. DVI-DL Output Port
Supported Boards:
MX-DVIDL-OB
▪
Description: Query or set the dual-link DVI output port parameters.
7.9.9.1. Port Parameters and Settings
Querying the Parameters
Command {:ISL54105#<out>@<S/C/A>O=?}
Response (ISL54105#9@SO=<curr>;<preemp>;
<band>;<mode>;)CrLf
Explanation: The actual setting is in the response.
Setting the Parameters
Command {:ISL54105#<out>@<S/C/A>O=x;x;x;<mode>} → {:ISL54105#9@SO=x;x;x;0}
Response (ISL54105#9@SO=<curr>;<preemp>;
<band>;<mode>;)CrLf
Explanation: The DVI port mode is changed to Dual link mode, the others left unchanged. Use the 'x' character
to keep the actual value of a parameter.
Legend
Identifier
<curr>
<preemp> PreDmphasis
<band>
<mode>
The first three parameters are for internal use, type 'x' character instead and set the desired DVI port mode
by the fourth parameter.
Format
→ {:ISL54105#9@SO=?}
← (ISL54105#9@SO=7;15;2;2;)CrLf
Format
← (ISL54105#9@SO=7;15;2;0;)CrLf
Parameter Description Parameter Values
Output level
Port-related parameters (internal use)
PLL bandwidth
0 = Dual-link mode is active
1 = Sinlge-link mode is active
DVI port mode (DL/SL)
2 = Auto mode (the dual-link half controlled
automatically depending on the input signal)
112
Example
Example