Mx-Fr33L - Lightware MX-FR Series User Manual

   
3. Product Overview
3.9. MX-FR33L
Front View
USB control USB connection for Lightware Device Controller software.
1
Menu display Displays status information and menu operation.
2
Menu navigation Arrows, escape, and enter buttons for menu navigation.
3
Status LEDs CPU live LDD blinks to indicate normal operation. Power LDD
4
lights green when the router is powered on.
Control lock Press long to disable or enable front panel buttons. When red is
5
illuminated, all operations on front panel are prohibited.
6 Output lock Locks one (or more) outputs. Inhibits accidental input changing
on protected output.
7 Source buttons Source buttons can be used to select an input or preset or to
view the selected input's state.
Destination buttons Destination buttons can be used to select an output, or view
8
the selected output's state.
Aake / Auto Displays the actual switching mode (TACD or AUTOTACD).
9
Long press toggles the switching mode, short press executes
switching in TACD mode.
q Preset buttons Load preset: apply a previously saved crosspoint preset
from one of the preset memories. Save preset: stores actual
crosspoint state, in one of the preset memories.
w EDID mode Switches the Menu display to DDID menu allowing DDID switch,
DDID save etc.
e Signal present Displays live sources and attached sinks on source and
destination buttons.
MX-FR Series Modular Matrix Frames – User's Manual
5
6
7
8
9
q
e
w
1 2 3 4
19